Jointer

Overview of Jointer

Jointer brings an array of experience and expertise having supported students on the ground as a school social worker (in both the charter and traditional public schools), experience working as a social worker in a behavioral health hospital as well as network and district level positions to make positive decisions to support students and staffs across Chicago Public Schools.

Jointers can be one of the most frustrating tools to set up and to use, and a fewtimes it’sn’t even the machine, a fewtimes it’s the wood that’s the problem all along, but we blame it on the machine or how we set up the jointer.

Jointers are the go-to tools for straightening and squaring lumber, and standard-length 6-inch-wide capacity models are a great choice for most carpentry and trim uses in the shop and on the job site.

jointer on the woodwhisperer but ran into just a bunch of ads that really started confusing more more than anything when I was reading the replies.

Jointer is passionate about educating all children, staff and school leaders around developing a holistic approach to support student achievement.

The jointer is used to flatten one face and square up one edge and the planer is then used to make the second face flat and parallel to the first.

The jointer is a kind of woodworking machine allowing to transform a rough part into a tool with four well parallel faces and squares.

Jointer planers also offer you a wide jointing capacity because the wide planer cutterhead is also acting as the jointer cutterhead.

The jointer is a little plow which takes the place of the coulter and is attached to the plow-beam in the same manner.

Jointers are also used for making rebates (also known as rabbets in North America) in finished timber.

Support

Tynisha Jointer, LCSW, ME.d, is a Chicago native and product of Chicago Public Schools.

Can a Jointer be used as a Planer?

Technically, yes.In our example of the 5 boards, you could run the thicker boards over the jointer until it has cut enough of the board away so that it is the same thickness as the thinner boards.However, this method will be almost impossible ensure all the boards are cut the same exact thickness.

What size Jointer do I need?

The common answer that you will get when you ask this question is “Buy as big and as much as your shop and wallet can handle.” Great advice, but not always the most practical.

Are bench top jointers worth it?

The initial costs for the convenience of owning tools sound expensive.This is what you trade when you choose to build using home center S4S instead of milling your own wood at home.

What does a good jointer cost?

This is one of those occasions when you pretty much get what you pay for.These are robust, powerful machines, and none are cheap. Entry-level benchtop models will cost $300 or more.The best of these jointers cost around $450.

Recap: Why Would you Buy a Benchtop Jointer?

The short answer is: to save time.

Are bench top jointers worth it?

The initial costs for the convenience of owning tools sound expensive.This is what you trade when you choose to build using home center S4S instead of milling your own wood at home.

How much can you spend?

The best jointers are typically a pricey addition to a workshop.Cheap jointers tend to be poorly made, however.If remotely possible, it’s best to aim for a middle-of-the-range model unless you specifically need premium features.Be aware that closed-stand stationary models will be pretty pricey.

Do I Need a 6” or 8” Jointer?

This will strongly depend on your timber sizes and needs.If you only work with smaller sizes, then the 6” jointer will do just fine.It’s also possible- though sometimes frustrating- to use a 6” jointer for larger work.However, it gets frustrating fast.

How does a jointer work?

To understand how a jointer works, let’s take it step by step.First, take a piece of rough wood and lay it lengthwise on the entry table.It must be set beforehand so that we can have the desired thickness.

How do you work with the blades?

Out of the box, you will have a nice sharp cutterhead.Over time, however, your jointer’s blades will wear down and need to be changed.Curved blades are safer than straight blades, with less risk of snapping.They also hold a sharp edge for longer.

Do I need a Jointer?

Many of the big box stores have a limited assortment of hardwood options available in their stores.Lowes and Home Depot typically only carry Pine, Oak and Poplar.There are a few large hardwood supply stores scattered around the country that have more availability.Consider yourself lucky if you live near one.

What is a jointer used for?

The jointer is a kind of woodworking machine allowing to transform a rough part into a tool with four well parallel faces and squares.It also offers the user the opportunity to use his planer to work with wood, in order to have the desired dimensions.

Should you get a 6 or 8-inch jointer (or even bigger)?

Knowing the difference between the four models, you may wonder whether you should get the 6 or 8-inch jointer.Which one is right for you depends on multiple things, but in most cases we think the 8-inch jointer is the way to go.

How do I use a Jointer Safely?

Even the best jointer on the market is still a powerful woodworking tool.It’s critical you always enact the very best safety precautions when working with your jointer.Accidents can literally be life-threatening.

What attachments do what?

Fences keep the wood straight and aligned.These, and the bases, should always be adjustable.This allows you to flatten at any angle.Typically, you will want the guides and fences to be adjustable.This adds versatility and helps secure everything.

How does a jointer work?

The jointer’s cutter head spins between a two-part infeed-outfeed table.The tips of the blades in the cutter head are set level with the stationary outfeed table surface.

Should you upgrade to the Helical Head?

The fact that the standard model has standard knives and not quick-change ones makes the upgrade to helical head cutters even more of an upgrade.It is more expensive, however, at about $500.In percentage terms this is about the same upgrade cost as for the 6-inch jointers.

What is a Jointer? Is Jointer the Best Hand Tool?

Even the smallest children know exactly what a hammer, saw, screwdriver and even a drill or grinder.But regarding what is a jointer, even the name seems foreign by most people.

Does it stay clean?

Dust collection can be pretty key for DIY woodworking.Dust collection features are a boon.Dusty workshops can be dangerous, as well as cause breathing issues.Bigger bins tend to be better for you, ensuring you can work longer.

How does a Jointer work?

As jointer is built so that there is a table on the right and left side of the rotating blades.The tables are referred to as infeed and outfeed tables depending on which side of the blade they are located.These table surfaces are very smooth and often times need a thin coat of wax applied to them so that the stock moves freely and easily over them.

What is the difference between a jointer and a planer?

Both are different types of wood surfacing machines.The basic difference between the two in which aspects of a wood piece they focus on.The jointer acts on the surface and edges of the piece, making them flat and straight.A planer is mainly for making changes to the thickness of the piece.

What table do you need?

Table width and cutter depth are key.Wider tables are usually pricier.Remember that the bed needs to be accurately orientated to the knife.This means that the bigger tables need more precision to create, hence the price.6”- 8” are average for DIY work.If you typically need to use larger timbers, you may need more.Cutting depth refers to the passes needed to achieve results.½” and ¾” are standard, typically needing only one pass.Smaller depths may need two.Tables should also be adjustable.This helps you flatten wood at different angles, ensuring a quality cut.Bigger tables are harder to adjust.This is mostly because of their weight and reach.

What does a jointer do?

Contrary to its name, a jointer doesn’t make joints; it planes the edges of boards.Don’t confuse it with a thickness planer, which dimensions rough lumber to exact thickness, but doesn’t do much else.

How does a jointer work?

The jointer’s cutter head spins between a two-part infeed-outfeed table.The tips of the blades in the cutter head are set level with the stationary outfeed table surface.

What is the difference between Jointer and Planer?

When you first read about the purposes of a jointer and planer, it is easy to assume they are similar enough that you can get by with just purchasing a jointer.This isn’t an accurate assumption.

What is the difference between a jointer and a planer?

The geometry of the jointer makes it possible to dress on two sides but cannot calibrate the board.To be able to achieve this end, a planer must be used.

How powerful is it?

The average jointer’s motor is 1 hp.This is pretty ideal for most softwoods, even at cutting depth.Motors rated above this are typically for hardwoods.

Jointer or planer?

Similar to the names of the tools are understandable: both are designed to align the surface of the workpiece.

When should I use a jointer?

There is a significant difference in price between finished and unfinished pieces of lumber.If you use a lot of pieces regularly in your workshop, it might make sense to have your finishing equipment.Then you can buy raw wood pieces on the cheap and do the surfacing in the shop.

What is a Jointer, Anyway?

A jointer is a specialized woodworking tool.It’s created specifically to square up the end of your boards.This ensures that they can be edge-laminated together seamlessly.The same job can, perhaps, technically be done with a table saw.However, the best jointers will give you a far superior, seamless finish.If you often need to edge-joint boards, you will find a jointer indispensable.They come in a variety of lengths and widths to suit all types of board.

What is a jointer and how does it work?

There may be different models (including the benchtop variant), but the basic template of a jointer has a set of cylindrical blades set deep on a flat surface.This flat surface of the machine has two parts, with the blade right in the middle.

JET JJ-6CSDX vs JJ-6HHDX Jointer: Quick-set Blades or Helical Head?

On to the differences then.As mentioned before, the cheapest model, the JET JJ-6CSDX, has quick-set straight blades, while the JJ-6HHDX has spiral cutters.

How to choose the best jointer?

Having your own jointer, whether you are a professional handyman, a carpenter by trade or only in the shoes of a simple user is suitable.

Ready to step up from your bench top model?

Step up from any 6″ model you might be considering to this larger capacity helical cutterhead 8″ jointer.The G0856 comes equipped with a 4-row helical cutterhead with 36 indexable carbide inserts that can each be rotated three times to expose a new, sharp edge.This is like getting three knife changes with each set of inserts—which also don’t require the finicky adjustment and setup that knives do.You’ll save valuable time and money right off the bat.

What Is A Jointer Used For In Woodworking?

A jointer is quite possibly one of the most underrated tools in a woodworker’s shop.It’s will never be the first tool a person buys for their shop (nor should it be).However, once you begin looking to buy lumber from a sawmill, it is probably time to look at getting a jointer.Depending on how much lumber you buy, you may find that it pays for itself in just a couple of years.

What does a jointer do?

Contrary to its name, a jointer doesn’t make joints; it planes the edges of boards.Don’t confuse it with a thickness planer, which dimensions rough lumber to exact thickness, but doesn’t do much else.

What size jointer?

There are two main types of jointer: benchtop and floor-standing.

What is a Jointer purpose?

When considering what a jointer is, we note this tool is used to change the surface quality of wood.

Why You Need a Jointer Instead of a Planer?

Basically, a jointer is used to make one plane of wood flat.It is ideally used to straighten a specific face of a plank.A planer, on the other hand, is used to straighten/flatten the whole plank with an equal thickness on both sides.

What to Look for in a Jointer?

Whether you’re new to woodworking or are just looking to upgrade your old jointer, there are a few things to look out for when choosing the best jointer.

History of Jointer